METAL WORKING OIL

Call Us Now!
+91 22 40168000
Cutting Oils
Proper lubrication reduces friction resulting in :
  • fewer coolant requirements
  • less cutting energy
  • reduced cutting tool wear
  • improved surface finishes
    For Technical Data Sheet Click here
<img src="metal workingoil.png" alt="metal working oil from Ipsa">
<img src="cutting oil.png" alt="metal working oil from Ipsa">
Ipsa has developed a complete product range for all metals:


  • steels,
  •  cast irons,
  •  aluminum,
  •  titanium…








For machining operations, Ipsa offers a wide range of lubricants for:


  •  bar turning,
  •  turning,
  •  milling,
  •  drilling,
  • boring,
  •  grinding,
  •  EDM, and
  •  metal cutting
  •  press stamping.



Ipsa's Metal Working Oils, also called cutting oils, perform over a wide range of metal working operations. They are available in two distinct families:
  • Soluble Cutting Oils – METSOL / METSOL HD - for general machining operations, including cutting, drilling, milling and grinding.
  • Neat Cutting Oil – CUTICUT - non-stain transparent cutting oils for high-speed automatic screw machining and simple turning.
  • Neat Cutting Oil - CUTICUT PLUS - for use in various machining operations, such as tapping, threading, broaching and conventional turning
  1. Metsol
    METSOL for general machine operations, including cutting, drilling, milling and grinding. Recommended for all machining operations, where cooling and rust protection are important. Contains a biocide (an antimicrobial agent). Metsol reduces friction at or near the tool tip, where the highest temperatures occur and between the moving tip and the rake face of the cutting tool.
  2. Metsol HD
    METSOL HD for surface finish and long tool life. Contains extreme pressure additives for use in metal removing operations where a high degree of surface finish and long tool life are desired. Provides good rust protection and contains a biocide (antimicrobial agent).
  3. Cuticut
    For extended tool life and producing quality finishes on machined parts, trust Ipsa's CUTICUT Neat Cutting Oil. CUTICUT oils are non-stain, transparent cutting oils intended for use in high-speed automatic screw machining and simple turning. Recommended for low carbon steels, free machining steels and non-ferrous metals. Excellent lubricity and anti-wear characteristics. Available in 25 and 32 viscosity grades.
  4. Cuticut Plus
    CUTICUT PLUS Neat Cutting Oils provide lubrication in various machining operations, such as tapping, threading, broaching and conventional turning. Excellent lubricity and anti-weld properties. Helps extend tool life and produce a quality finish on machined parts. CUTICUT PLUS 13 is a low viscosity oil, specially suited to thread cutting and deep-hole drilling of tough to machine ferrous materials. Available in 13, 25 and 45 grades.